标签

How to Save Sublimation Ink with Direct Sublimation Printer ?


Now the sublimation of the flag machine, is the direct sublimation printer in the advertising industry more and more common, but because the ink is relatively relatively "squeamish", and the usage is also "very particular", so in order to make it efficient for their own Work, you must master some of these know-how. Here to share with you a few ways to save ink.




1,Try to focus on printing
In the use of the flag machine, the worst is to print every few minutes, if you need to print a lot of things, I suggest you will need to print things together to print. Because every time the machine starts, you have to clean the nozzle and initialize the banner machine, the ink delivery system to fill the ink, this process to waste more ink, so try not to start the machine frequently.

2,The correct cleaning nozzle
Most inkjet printing devices will automatically clean the print head and have a button to clean the nozzle. If the device's automatic cleaning function is invalid, you can manually clean the nozzle. Manual cleaning should remove the nozzle according to the procedure in the operating manual. Manual cleaning nozzle can be in the front of the medical syringe set a fine tube, into the strict filtered water rinse, rinse with a magnifying glass to carefully observe the spray hole, such as spray hole next to the silt residue, can be used to remove the soft plastic products. Cleaning nozzle should note the following:
A, do not use sharp objects to clean the nozzle, can not hit the nozzle, do not touch the nozzle
B, can not be disassembled in the live state, install the nozzle, do not hand or other items contact the nozzle on the electrical contacts
C, can not remove the nozzle from the flag machine placed alone, can not put the nozzle in dusty places.

3, Do not replace the ink cartridge immediately
We know that the Sublimation Banner device detects the amount of ink in the cartridge by sensing the sensor, and the sensor prompts to replace the cartridge as long as it detects that the amount of ink in one color is less than the value set inside the banner. At this point, we can remove the ink cartridge to reset the internal sensor of the printer to determine the installation of the new cartridge.

4, To minimize the number of cleaning
Equipment in the use of the process often occurs inkjet plug phenomenon, causing a lot of clogging, such as the machine's working environment, the quality of the ink, the machine idle time, etc., because each time the inkjet head to consume a lot of ink, so Should minimize the number of cleaning inkjet head, of course, when using the machine should pay attention to the use of machine manufacturers specify the type of ink.




标签：

评论

发表评论

热门博文