How to do the maintenance of the eco-solvent printer during the Spring Festival?
How to do the maintenance of the eco-solvent printer during the Spring Festival?
With the departure of New Year's Day, the Spring Festival is close at hand. How can we maintain and maintain the eco-solvent printer during the Spring Festival holiday? Everyone knows that if the printer does not start working for a long time, it may cause problems such as blockage of the print head of the machine at any time. Therefore, every time you take a break, take a long vacation, etc., you don't have to write a real machine. Everyone needs to pay attention to the maintenance of the advertising printer. Below I will give you some suggestions based on my own summary, I hope to help everyone in the maintenance of eco-solvent printers.
1. Regardless of the model, the room temperature stored in the advertising printer must not be lower than 0 °C. If conditions permit, please maintain the temperature above 14 degrees Celsius.
2. If the company is on duty during the holiday, please print the print head test strip every day to check if the print head is blocked. If there is a blockage, perform a cleaning operation to ensure that the print head is in good condition. It is best to make a composite black block with a color value of 50-90 each, which is printed once a day, at least 60cm wide and 20cm long.
3. If the company is unattended. Before leaving, you should:
(1) Print the test strip to ensure that the print head is in a normal state without breaking the ink;
(2) Machines that use solvents and weak solvent inks use clean cotton swabs, special cleaning solutions; machines that use water-based inks use clean cotton swabs, purified water (note: preferably pure water, never use tap water) to wipe the print head clean . (Note: It is best to wipe in one direction, do not draw in a circle).
(3) The machine with sleep setting, the function of automatic cleaning and flashing after the machine is hibernated, do not turn off the main power of the machine, just turn off the operation power. After the hibernation setting is turned on, the machine will automatically perform nozzle cleaning or flashing according to the interval you set.
(4) Models with bubble nozzle function: For bubble machine operation, the bubbler time can be set slightly longer (note: do not turn off the main power). Models with no bubble nozzle function: Machines that use solvents and weak solvent inks drop special cleaning liquid into the ink stack. Machines that use water-based ink drop pure water into the ink stack, and tie the ink stack with rope or rubber band. Lower the ink tube and then turn off the main power.
(5) It is possible to set the model of the eco-solvent printer nozzle high and low, and set the machine print head to the low position as much as possible so that the print head and the ink stack are closed as much as possible.
(6) If the indoor temperature is close to 0 °C or the downtime is more than 10 days, or the ink tube is leaking, and the ink stack and the nozzle cannot be closed normally, it is recommended to pull out the ink cartridge and seal the ink in the ink tube to clean the ink and clean the pipe. Remove and clean, print the head with special print head protection solution, wrap it with plastic wrap.
Some people think that the eco-solvent printer's print head jam is irrelevant. I would like to remind you that when the printer print head is clogged, the situation of oblique spray, partial needle, flying ink, etc. will appear, and the service life of the print head will be shortened, and the print head needs to be cleaned repeatedly. If the weight is severely blocked, the ink is smeared, the side leakage, and the diaphragm is broken, the print head is directly scrapped. Therefore, everyone must pay attention to the maintenance of the eco-solvent printing machine during the holidays.
More info:
Tel: 86-025-83228884
Whatsapp: +86 18851084450
Website:www.ink-sublimation.com
E-mail: janezhang940213@gmail.com
Facebook:www.facebook.com/burberry.chen.1
1. Regardless of the model, the room temperature stored in the advertising printer must not be lower than 0 °C. If conditions permit, please maintain the temperature above 14 degrees Celsius.
2. If the company is on duty during the holiday, please print the print head test strip every day to check if the print head is blocked. If there is a blockage, perform a cleaning operation to ensure that the print head is in good condition. It is best to make a composite black block with a color value of 50-90 each, which is printed once a day, at least 60cm wide and 20cm long.
3. If the company is unattended. Before leaving, you should:
(2) Machines that use solvents and weak solvent inks use clean cotton swabs, special cleaning solutions; machines that use water-based inks use clean cotton swabs, purified water (note: preferably pure water, never use tap water) to wipe the print head clean . (Note: It is best to wipe in one direction, do not draw in a circle).
(3) The machine with sleep setting, the function of automatic cleaning and flashing after the machine is hibernated, do not turn off the main power of the machine, just turn off the operation power. After the hibernation setting is turned on, the machine will automatically perform nozzle cleaning or flashing according to the interval you set.
(4) Models with bubble nozzle function: For bubble machine operation, the bubbler time can be set slightly longer (note: do not turn off the main power). Models with no bubble nozzle function: Machines that use solvents and weak solvent inks drop special cleaning liquid into the ink stack. Machines that use water-based ink drop pure water into the ink stack, and tie the ink stack with rope or rubber band. Lower the ink tube and then turn off the main power.
(5) It is possible to set the model of the eco-solvent printer nozzle high and low, and set the machine print head to the low position as much as possible so that the print head and the ink stack are closed as much as possible.
(6) If the indoor temperature is close to 0 °C or the downtime is more than 10 days, or the ink tube is leaking, and the ink stack and the nozzle cannot be closed normally, it is recommended to pull out the ink cartridge and seal the ink in the ink tube to clean the ink and clean the pipe. Remove and clean, print the head with special print head protection solution, wrap it with plastic wrap.
Some people think that the eco-solvent printer's print head jam is irrelevant. I would like to remind you that when the printer print head is clogged, the situation of oblique spray, partial needle, flying ink, etc. will appear, and the service life of the print head will be shortened, and the print head needs to be cleaned repeatedly. If the weight is severely blocked, the ink is smeared, the side leakage, and the diaphragm is broken, the print head is directly scrapped. Therefore, everyone must pay attention to the maintenance of the eco-solvent printing machine during the holidays.
More info:
Tel: 86-025-83228884
Whatsapp: +86 18851084450
Website:www.ink-sublimation.com
E-mail: janezhang940213@gmail.com
Facebook:www.facebook.com/burberry.chen.1
评论
发表评论