How Much Do You Know About DTG Printing ?
DTG printing is also Direct To Garment printing ,means printing ink direct to garment ,without intermediate medium.DTG printing ,printer :DTG printer;ink :pigment ink,acid ink, active ink;garment:100% cotton garment.
Nowdays,DTG printing become more and more popular in those years .However ,do you know DTG specific printing process ?
Only print color:
1,Temperature: 330F-340F (166 ℃ -170 ℃) heat press clothes
2,Time: 60S
3,Pressure: low pressure
4,Before pressing need to wear silicone paper on the clothes (very important).
Print white ink
1, printing pre-preparation
(1). With high pressure to heat press clothes, guarantee the T-shirt cotton fiber formation, with flat surface can print better image.
(2). Time: 30S
2, pre-processing before printing the image
(1)print the picture at 14cm * 17cm , the amount of treatment solution is between 20g-25g (0.7 to 0.9 ounces).
(2)Do not use too much treatment solution. For most users this is a common problem: too much processing solution will lead to washability problems because the pre-treatment layer will prevent the white ink into the cotton, the ink "floating" on the T shirt surface. As a result, the pre-treatment and the ink are washed off in water, and the image will peel off or crack. Use just enough solution to allow the white ink to print out a bright image.
3, pretreatment after the pre-processing
(1), before pressure need to put silicone paper on the clothes (very important).With silicone paper on the clothes, can make the treatment solution easily evaporate from the clothes, other wise treatment liquid will stay between the clothes and heat press which will cause color difference.
(2), temperature: 330F-340F (166 ℃ -170 ℃) pressure ironing clothes
(3), time: 30s-45s
The time of 30s-45s is to observe that the treatment fluid becomes steam (smoke) during the pressing process, which ensures that the clothes are dry and the treatment liquid has evaporated.
(4), pressure: heavy press
With high pressure to press the clothes, can guarantee the T-shirt cotton fiber formation, a flat surface can be print better image.
4, the pressure set after printing
After printing white ink or color ink
(1), temperature: 330F-340F (166 ℃ -170 ℃) pressure ironing clothes
(2), Time: 60s
(3), pressure: light pressure
(4), before pressure need to put silicone paper on the clothes (very important).
Washing method
1, when finish the printing and heat pressing, it is best to start washing after one day.
2, it is recommended to use cold water washing clothes, The first wash will result in about 5% color fade, after 1-5 times washing cause 5% -10% color fade, after which colors will remain stable.
More Info:
Company:Nanjing FeiYue Digital INC.
Website:http://www.skyimagepaper.com/
facebook:https://www.facebook.com/burberry.chen.1
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679
Nowdays,DTG printing become more and more popular in those years .However ,do you know DTG specific printing process ?
Only print color:
1,Temperature: 330F-340F (166 ℃ -170 ℃) heat press clothes
2,Time: 60S
3,Pressure: low pressure
4,Before pressing need to wear silicone paper on the clothes (very important).
Print white ink
1, printing pre-preparation
(1). With high pressure to heat press clothes, guarantee the T-shirt cotton fiber formation, with flat surface can print better image.
(2). Time: 30S
2, pre-processing before printing the image
(1)print the picture at 14cm * 17cm , the amount of treatment solution is between 20g-25g (0.7 to 0.9 ounces).
(2)Do not use too much treatment solution. For most users this is a common problem: too much processing solution will lead to washability problems because the pre-treatment layer will prevent the white ink into the cotton, the ink "floating" on the T shirt surface. As a result, the pre-treatment and the ink are washed off in water, and the image will peel off or crack. Use just enough solution to allow the white ink to print out a bright image.
3, pretreatment after the pre-processing
(1), before pressure need to put silicone paper on the clothes (very important).With silicone paper on the clothes, can make the treatment solution easily evaporate from the clothes, other wise treatment liquid will stay between the clothes and heat press which will cause color difference.
(2), temperature: 330F-340F (166 ℃ -170 ℃) pressure ironing clothes
(3), time: 30s-45s
The time of 30s-45s is to observe that the treatment fluid becomes steam (smoke) during the pressing process, which ensures that the clothes are dry and the treatment liquid has evaporated.
(4), pressure: heavy press
With high pressure to press the clothes, can guarantee the T-shirt cotton fiber formation, a flat surface can be print better image.
4, the pressure set after printing
After printing white ink or color ink
(1), temperature: 330F-340F (166 ℃ -170 ℃) pressure ironing clothes
(2), Time: 60s
(3), pressure: light pressure
(4), before pressure need to put silicone paper on the clothes (very important).
Washing method
1, when finish the printing and heat pressing, it is best to start washing after one day.
2, it is recommended to use cold water washing clothes, The first wash will result in about 5% color fade, after 1-5 times washing cause 5% -10% color fade, after which colors will remain stable.
More Info:
Company:Nanjing FeiYue Digital INC.
Website:http://www.skyimagepaper.com/
facebook:https://www.facebook.com/burberry.chen.1
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679
评论
发表评论