Dried food! Six important matters of attention to the typesetting of laser cutting machine

Before using the laser cutting machine, we all introduce the produced drawings into the program, and then use the typesetting software to arrange the graphics on a plate so that the laser cutting machine can process the product in batch. Among them, the typesetting process is very short, but there is a lot of knowledge hidden in it.

Corner melting

When decelerating the corner of a thin steel plate, the laser will melt the corner due to overheating. A small radius is generated at the corner to keep the laser cutting at a high speed to avoid overheating and melting of the steel plate at the cutting corner, so as to obtain good cutting quality and reduce the cutting time and increase the productivity.

Part spacing

In general, cutting thick plate and hot plate, the spacing between parts is large. Because thick plate has great influence on hot plate, when cutting corners and small figures, it is easy to burn edges and affect cutting quality.

Lead setting

In the process of cutting thick plates, in order to make the slotting well connected and prevent the burn at the beginning and end, a transition line is often cited at the beginning and end of the cutting, called the lead and the tail. The lead and tail are not used for the workpiece itself. Therefore, it should be arranged outside the scope of the workpiece, and be careful not to place the lead wire at sharp corners and so on. The connection between the lead and the slotting is as circular as possible, so that the movement of the machine is stable and the burn caused by the corner stopping is avoided.

Common edge cutting

Two or more parts are combined into a combination, and the large batch of regular graphics can be shared as much as possible. Common edge cutting can greatly shorten the cutting time and save the raw materials.

Part collision

In order to maximize the efficiency of production, many laser cutting equipment are 24h continuous operation, and the use of unmanned automatic on / unloading device, hit the finished slicing parts and cause the cutting head damage and production interruption, resulting in greater loss. This is the time to be sorted.

1. Choose the right cutting path, bypass the cut parts, reduce collision.

2. Choose the best cutting route and reduce the cutting time.

3. Small or small parts can be automatically or manually combined with tiny connections. After cutting, the parts disconnected can easily disconnect tiny connections.

Remainder treatment

After cutting the parts, the skeleton material on the worktable of the laser cutting equipment needs to be removed as soon as possible, so as to facilitate subsequent cutting operations. For laser cutting equipment without automatic unloading device, skeleton waste can be cut into small pieces to facilitate quick removal. Thus, the operator can avoid personal injury caused by moving heavy and sharp edges.


More info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-86628894
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China