Analysis!How is the roller drum heat transfer machine pressurized?

Before discussing the problem of how to press roller drum heat transfer machine, let's talk with you about how it is put into cloth.

The insertion and installation of roller drum heat transfer machine

The multi function roller printing machine is divided into interlining cloth insertion and white cloth cloth installation. The lining cloth is tightly packed, and the white cloth is used loosely. The fabric is fed in the way of super feeding, the fabric is suspended in the shape of the cloth ring, the speed of the feeding roll is controlled by the photoelectric tube, and the white cloth is relaxed into the head to make the fabric tension divergent and reach the excellent printing effect. No lining printing machine only set white cloth into the cloth installation.

Pressure mechanism of roller drum heat transfer machine

The pressure mechanism of the roller printing machine: the pressure mechanism exerts pressure on the cylinder through bearings on both ends of the flower shaft. In order to make the printing patterns clear, the size of the left and right printed pulp must be appropriately applied. The pressure is too light, and the printed pattern is so shallow that even the bottom is exposed. Too heavy it will be vague and distorted. It will also increase the power loss and increase the wear of parts. Usually the bold and large patterns of flowers and light rollers as light plates are pressed lightly, and the fine lines, clouds and snowflakes are heavily pressed.

The line pressure range is 100 - 600N/cm, commonly used 200 - 400N/cm. The total pressure of each flower can reach 2 x 104 - 8 x 104N as the length of the flower tube is different. In addition, the pressure mechanism should also meet the following process and operation requirements:

1. It can centrally control the advance and retreat of the flower barrel and the bearing seat, and can accurately and accurately regulate the pressure on the left and right sides of the roller printing machine.

2. The pressure system should be elastic. When the joint of the cloth is bent through the compression point or the shaft, it can act as a buffer and reduce pressure.

If you are interested in digital printing, our official website provides a variety of heat transfer equipment, such as dye sublimation printers,  sublimation paper and ink, and so on, and ensure quality.