How does the heat transfer technology adjust the amount of sublimation ink?

In the process of the thermal transfer paper technology, the ink needs to pay attention to the adjustment amount so that the color reaches a certain level. The specific color tone of the ink is the same as that of the ordinary ink, but the color of the heat transfer ink printed on the thermal transfer paper and transferred to the fabric is different. Therefore, what we need to use is to use the thermal transfer technology to transfer the sublimation ink to the fabric and then look at the color and then fine-tune it.

However our products need to be generally used in various adjustments to note the following:

1. It is generally determined that the light ink is used as the basic ink and then other inks are added. The thermal transfer paper technology needs to make good use of such an amount of ink so as not to be excessive.

2. When adding ink, you should gradually add dark ink. Do not add too much at one time, so as not to use a lot of light ink to remedy.

3. When the hue is close to the color sample, the thermal transfer should be carefully added to the ink, especially for those dark inks and low added inks. It is good to apply inks by applying the relationship between primary colors, intermediate colors and complementary colors.

4. When there is color deviation, the ink with the closest hue should be selected. If the red color is not yellow enough, you should choose gold red or orange red. You can't easily add yellow ink.

5. When using this thermal transfer paper technology, you need to pay attention to the effect of the adjustment viscosity of each item on the ink color.

6. To understand the effect of the thickness of the ink layer on the color depth.

7. Remove the wet sample of the standard color ink and mark it. It can be used as a standard reference wet sample when the ink is next dispensed. Parallel proofing with the color wheel during blending is beneficial for comparison, but it needs to be and because it is wet, the accuracy will be higher.

8. The heat transfer paper technology takes into account the post-printing processing characteristics. For example, if the printing needs glazing, then the general ink can be selected. If the water-based ink with good abrasion resistance is selected, the cost is high and the glazing effect is affected.

9. Similar blending, the more varieties of blending, the darker the color, and our heat transfer paper technology needs to be able to use primary ink never use intermediate ink, heat transfer can use intermediate ink never use duplex ink.

Today's article is shared here, if you are interested in our products, you can click on the link to buy. If you have any questions about the sublimation printing, please leave a message below, we will reply as soon as possible, thank you for browsing.