Laser cutting machine focusing mirror installation method and precautions

After the laser cutting machine focusing mirror is used for a long time, if the film is dropped, dents, scratches, etc., the function of the laser device will be greatly reduced. In order to function properly with the laser cutting machine, it is necessary to replace the new lens in time. So, how should we properly install the focusing mirror? The following high-energy lasers will briefly introduce the installation method and precautions of the laser cutting machine focusing mirror.

Laser cutting machine focusing mirror installation method:

1. Place the protective film of the laser cutting machine focusing mirror in the palm of the hand, with the convex side of the lens facing up.

2. Pick up the focus tube and carefully place it in the hand of the lens to cover the entire lens.

3. Rotate the left and right hands 180 degrees clockwise.

4. After releasing the lens, tighten the mirror nut with a small steel ruler.

5. Install the air jet cup on the focusing cylinder of the laser cutting machine.

Laser cutting machine focusing mirror Note:

1. The laser cutting machine has a convex surface facing upwards and cannot be reversed.

2. No smudges or fingerprints are allowed on the mirror surface.

3. The steel ruler into the card slot, lightly screwed tightly, and the edge of the steel ruler can not touch the lens.

4. Gently shake, the lens is not loose.

The above is a brief introduction to the installation method and precautions of the laser cutting machine focusing mirror. If you want to know more about the laser engraving machine, please click on our official website SUBLISTARLASER.

More info:
Website: www.sublistarlaser.com
Company Name: Fei Yue Digital Technology Co.,LTD
Tel: 86-025-86628894
E-mail: sales@sublistarlaser.com
Whatsapp: +86 18851084450
Address: Central Road 323, Nanjing, Jiangsu, China