What are some suggestions for print head protection?

Use certified ink

Use word of mouth ink that other people have used, use dachang ink, use versatile ink. Under current industry conditions, most inks are not very different.

There is something wrong with the machine

Temperature: 20 to 25 ℃ or so, more than 30 ℃ above ink easy to reunite the appearance of the kind of jelly easy to cause the plug, the volatilization of ink on the nozzle can accelerate dry!

As far as possible humidity a little bit bigger, humidity should be in 40 above! Humidity should be above 40, too dry environment print head easy to dry.

About the protection of the print head in the shutdown state

Have inky mat, sit on inky mat, maintain airtight sealing, the conduit below is airtight, namely nozzle part does not enter air, do not enter light! Did not use inky mat, can use clean fluid or alcohol to be put on nonwovens, nozzle sits go up to undertake protecting wet, should undertake checking every other day, prevent dry.

Check print head status daily

Found that the nozzle has plugging phenomenon, immediately clean quickly, do not insist on printing in similar circumstances, clean the printing head, ink can not be vigorously carried out, the bottom of the printing head is very fragile, strong ink on the printing head damage is extremely huge, easy to cause the printing head string ink! Many print heads are not broken. More than half of them are broken!

To sum up, a few key points about the protection of printing head: heat transfer ink, temperature, humidity, wind, light, correct ink extraction, correct seal printing head! These key points as long as you do, print the first life of more than a year without problems!

More info:

Website: www.skyimagepaper.com

Company Name: Fei Yue Digital Technology Co.,LTD

E-mail: sales@feiyuepaper.com 

Tel: 86-025-86628894

Address: Central Road 323, Nanjing, Jiangsu, China