Do you know how to use the roller drum heat transfer machine?
In the present printing industry, the technology is more and more new, and everyone's innovation ability is also constantly enhanced. The appearance of more printing machines perfectly meets the hot demand of the present market. And roller drum heat transfer machine is one of these following the trend of printing equipment.
Heat transfer cylinder printing machine process has a brilliant solution.
Turn on the switch and press the general power button. The power indicator is on. Turn on the heating switch and the green light of the temperature controller.
Temperature setting
1. Check the setting of the dial code before starting up the machine to prevent the blanket from burning due to artificially high setting.
2. The temperature controller dial decoder digital dial in below 250 ° C, little green light to start automatic temperature control.
3. When the temperature reached around 250 ° C, red light says working temperature is to transfer.
4. Turn on the motor switch, turn it forward, and turn the speed control knob slowly from left to right to the appropriate speed.
5. If the temperature is too low when printing, set the temperature to be raised appropriately, otherwise lower.
Power cut processing. In order to ensure the transfer of finished products, after the power off, please turn the motor belt trays, at this time can transfer printing, the effect is the same (note that the speed should be consistent).
In order to ensure the service life of the transfer printing blankets, every time after the transfer, please dispatch dial the decoder to below 95 ° C, the machines continue to roll, until the temperature fell to below 100 ° C, then stop.
Heat transfer cylinder printing machine process has a brilliant solution.
Turn on the switch and press the general power button. The power indicator is on. Turn on the heating switch and the green light of the temperature controller.
Temperature setting
2. The temperature controller dial decoder digital dial in below 250 ° C, little green light to start automatic temperature control.
3. When the temperature reached around 250 ° C, red light says working temperature is to transfer.
4. Turn on the motor switch, turn it forward, and turn the speed control knob slowly from left to right to the appropriate speed.
5. If the temperature is too low when printing, set the temperature to be raised appropriately, otherwise lower.
Power cut processing. In order to ensure the transfer of finished products, after the power off, please turn the motor belt trays, at this time can transfer printing, the effect is the same (note that the speed should be consistent).
In order to ensure the service life of the transfer printing blankets, every time after the transfer, please dispatch dial the decoder to below 95 ° C, the machines continue to roll, until the temperature fell to below 100 ° C, then stop.
More info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Address: Central Road 323, Nanjing, Jiangsu, China
评论
发表评论