What are the precautions and maintenance methods of ribbon printing machines?

Ribbon printing machine in the printing process must be in the correct operation method, and pay attention to the ribbon printing machine cleaning and maintenance, this will help us to prolong the life of ribbon printing machine and reduce the equipment error. The ribbon printing machine in the process of daily use, how to operation and maintenance?

The cautions of ribbon sublimation rotary heat press machine

1, temperature. When the temperature is reached, the thermostat pointer to point to in the position of the "180 ℃" (about 5 minutes), such as boot thermometer rise and hot plate is not hot, please check the circuit.

2, time. When hot stamping time arrived at the buzzer not ring or kept ringing, if not, must be adjusted to the appropriate location.

3, pressure. If pressure is not enough or too big, can calibration machine, the pressure regulating knob clockwise to increase pressure. On the other hand, the less pressure.

4, when the handle is down to the end, the hand let go of the handle to pick up automatically, please adjust downward adjustment knob.

5, when hot stamping, handle levelled up and feel hard, can adjust downward adjustment knob.

Ribbon printing machine maintenance method

1. The appearance. Wipe ribbon printing machine guide rail, the transmission parts and exposed portion, cleaning work area. Ribbon printing machine inside and outside clean and no dead Angle, no corrosion, the surrounding environment clean and tidy.

2. The manipulation of transmission. Check each part of the technical conditions, tighten loose parts, adjust the fit clearance. Check the interlock, insurance device. To drive sound normal, safe and reliable.

3. The electrical system. Wipe the motor, snakeskin tube surface, check the ribbon printing machine insulation, grounding, achieve complete, clean and reliable.

4. Ribbon printing machine axis (ribbon printing machine movement part), and butter twice every week.

5. Ribbon printing machine head, joints can drop butter (/ times a week, 10-20 g), oil (1 to 2 drops, 3 days/times).

6. Ribbon printing machine on the gas source processor; Aerosol oil, adjust to 4-5 drops per minute, and go to turn off the gas.

7. Ribbon printing machine bottom round, when cleaning platform of the table glue, avoid what wheel adhesive, after cleaning, check whether there is a sticky glue, bottom round if you have any available dry dishcloth besmear brush try, that day otherwise directly affect the precision of the printing.

8. Urgent stop switch, in use process, for ribbon printing machine on urgent stop switch to use less as far as possible, avoid abrupt stop effect chain, drag chain, the life of the synchronous belt.

With the advanced technology, the printing machine is more and more popular, ribbon printing machine is suitable for all kinds of monkey head belt, belt, special belt, gift belt, pet belt, belt, luggage belt, cell phone hanging belt, stopped, his shoes in the production of printed is not affected by ribbon thickness and width, can also be for a variety of ribbon press leveling. The excellency of ribbon printing machine is specialized in thermal transfer, thermal transfer equipment, positioning, less waste, reduce the wastage of the products, fast, good quality, ribbon printing no fading, high color fastness.