How to maintain the air compressor in the fiber laser cutting machine?
An air compressor is a device used to compress a gas. It is a device that converts the mechanical energy of a prime mover (usually an electric motor) into gas pressure energy, and is a pneumatic generating device for compressed air. The air compressor is part of the fiber laser cutting machine system. Below are the maintenance and repair work for its main components.
1. Air filter element. Under normal circumstances, every 5 hours to remove the dust impurities on the surface of the air filter element, check whether it needs to be replaced every 2,000 hours. The inspection or replacement cycle may be based on the dust content and the reference manual.
2. Intake valve seals. To operate the air compressor of the laser cutter for 4000 hours, check the condition of the seal and replace it if necessary.
3. Compressor lubricants. It is necessary to inspect the lubricating oil for 1000 hours/time and replace the lubricating oil every 4000 hours.
4. Oil filter. Change every 2,000 hours.
5. Oil vapor separator. A replacement is required every 4000 hours.
6. Pressure valve. Wash once every 4000 hours and check if the opening pressure is normal.
7. Safety valve. Check your movements every 4000 hours.
8. The oil drain valve. Water and dirt should be discharged every 2000 hours.
9. Transmission belt. The tightness should be adjusted every 2,000 hours, the wear condition should be checked every 4,000 hours, and it is necessary to change according to the wear condition.
10. Motor maintenance. Perform maintenance according to the motor instruction manual.
In order to make the air compressor of the laser cutting machine operate normally, the radium laser reminds you to make a detailed maintenance plan, perform the fixed operation, regular maintenance, regular inspection and maintenance, keep the air compressor unit clean, oil-free, no dirt.
2. Intake valve seals. To operate the air compressor of the laser cutter for 4000 hours, check the condition of the seal and replace it if necessary.
3. Compressor lubricants. It is necessary to inspect the lubricating oil for 1000 hours/time and replace the lubricating oil every 4000 hours.
4. Oil filter. Change every 2,000 hours.
5. Oil vapor separator. A replacement is required every 4000 hours.
6. Pressure valve. Wash once every 4000 hours and check if the opening pressure is normal.
7. Safety valve. Check your movements every 4000 hours.
8. The oil drain valve. Water and dirt should be discharged every 2000 hours.
9. Transmission belt. The tightness should be adjusted every 2,000 hours, the wear condition should be checked every 4,000 hours, and it is necessary to change according to the wear condition.
10. Motor maintenance. Perform maintenance according to the motor instruction manual.
In order to make the air compressor of the laser cutting machine operate normally, the radium laser reminds you to make a detailed maintenance plan, perform the fixed operation, regular maintenance, regular inspection and maintenance, keep the air compressor unit clean, oil-free, no dirt.
↘More info↙
Website: www.sublistarlaser.com
Company Name: Fei Yue Digital Technology Co.,LTD
Tel: 86-025-86628894
E-mail: sales@sublistarlaser.com
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China
评论
发表评论