How to clean the eco-solvent printer print head with cleaning solution?
Cleaning the print head may be done by every eco-solvent printer user, but do you know the specific steps and methods? The following is a brief description of the detailed method of cleaning the eco-solvent printer print head with a cleaning solution.
1. Remove the print head from the printhead tray.
2. Pour a proper amount of special cleaning solution into a clean glass container (for example, a beaker), put it into the print head and flood the bottom of the print head by 2~3mm, then seal the glass container with plastic wrap (ashproof). More than a day. Note: Do not touch the cleaning fluid on the signal interface at the top of the print head as this will damage the print head.
3. After the nozzle is soaked, pour a proper amount of special cleaning solution into the eco-solvent printer head cleaner, then immerse the bottom of the nozzle into the cleaning solution for about 2~3mm, then start the cleaner and select a dedicated printhead cleaner. Always use a general ultrasonic cleaner to strictly control the time to prevent damage to the print head. Note: Do not use the cleaner continuously for more than three times.
4. Use a glass syringe to extract 40ml of special cleaning solution, and inject it from the ink supply tube interface at the top of the print head. Pay attention to the status of the water line sprayed from the nozzle. If all the water lines are straight, the cleaning is effective. This print head Can continue to use (provided: the circuit and the piezoelectric crystal are intact). If there is still some waterline sneeze, you must do 2~3 times according to steps 2 and 3.
2. Pour a proper amount of special cleaning solution into a clean glass container (for example, a beaker), put it into the print head and flood the bottom of the print head by 2~3mm, then seal the glass container with plastic wrap (ashproof). More than a day. Note: Do not touch the cleaning fluid on the signal interface at the top of the print head as this will damage the print head.
4. Use a glass syringe to extract 40ml of special cleaning solution, and inject it from the ink supply tube interface at the top of the print head. Pay attention to the status of the water line sprayed from the nozzle. If all the water lines are straight, the cleaning is effective. This print head Can continue to use (provided: the circuit and the piezoelectric crystal are intact). If there is still some waterline sneeze, you must do 2~3 times according to steps 2 and 3.
More info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 18851084450
Address: Central Road 323, Nanjing, Jiangsu, China
评论
发表评论