Uv flatbed printer has some fatal flaws, you know?

Any machine is not perfect, uv flatbed printer is the same, there are advantages such as no plate making, low printing cost and simple maintenance. Naturally, there are also disadvantages.

Analysis of fatal shortcomings of uv flatbed printers:

The fatal shortcomings of uv printers that are easily understood by users are generally three-fold, but strictly speaking, they are too one-sided.

1. The print head is troublesome to maintain and is easily damaged.

This is the reality of existence, especially in the low-end civilian nozzle series, the cheaper the nozzle, the higher the failure rate and the shorter the life, this law is also suitable for use with other products, not just uv printers. Nozzle. Moreover, this piece of time can not be solved in a short period of time. The nozzles used in the domestic uv printer industry are imported. In the core areas of technology and design, there is no way to intervene.

On the other hand, most users buy civilian printheads that are basically less than $1,500, and some even have $400 printheads or lower prices. This price also requires long life and low failure rate of the printhead, which is difficult for some people. It is.

2. Slow speed and low efficiency

This is determined by the printing principle of the uv printer, which uses the principle of piezoelectric inkjet printing, mainly short-run digital printing. Compared with traditional silk screen printing and offset printing, the speed is very slow. But what needs to be understood is that the advantage of the uv printer is that DIY customizes all kinds of 3d embossed three-dimensional pattern printing. This is its strength. If you choose this kind of machine, the printed materials should be matched with it. If you take a uv printer to print an advertisement, it is definitely a loss. This equipment can be used to print materials such as mobile phone cases, leather, ceramic tiles, and glass walls.

3. High component failure rate

Compared with home printers or copiers, the failure rate and replacement of components are relatively high. Especially on devices with tens of thousands of dollars. This range of equipment meets the configuration performance has accounted for a large share of the total cost of equipment, plus each manufacturer is more powerful at this stage, the price pressure is very low, in order to ensure a certain profit, it must be in the relevant other parts Reduce the standard and reduce the cost, so that the cost can be properly lowered.

In general, whether you buy a uv printer or buy other products, the price can explain everything. There are a lot of shortcomings in cheap goods. On the contrary, if the price is high, the shortcomings that existed before can be eliminated or reduced a lot.